The Most Important Part of a Home Inspection.
As the recent hype about radon and termites are making their appearances, people are getting more concerned about them and forgetting that there are many other things as well that are crucial and enough attention should be paid towards them as well so that the home where we live in could be safe and no unexpected repairs should be faced which will cause a dent in the pockets of the homeowner. One of the very important yet most neglected parts of a home inspection is electrical inspection. Electrical Inspection Services North Richland Hills allows the residents to make sure that all the electrical systems of their houses are functioning properly. To proceed with this discussion, one needs to understand the complete process hence we will take you further, step by step.
What is an electrical inspection?
As we are all aware that our daily life is not possible without electricity, we must ensure that all the electrical systems of our house are working properly and there is no lag in the functionality. As stated by NFPA (National Fire Protection Agency), the fires caused due to electrical system failures are the top reason resulting in huge damages. So to avoid such hazards, getting an electrical inspection done for your house is something that cannot be ignored.
An electrical inspection is a thorough and complete check-up of all the electrical systems and wiring installed in your house for all the appliances to work properly.
Who is an electrical inspector?
An electrical inspector is an expert and authorized person certified by the state who can check all the functions related to electricity in a house or a building.
The importance of an electrical inspection:
As it is mentioned already, getting an electrical inspection done is very important to ensure that your house may not face any hazard related to housing fires, apart from that electricity surges and checking if all the electric systems of your house comply with the requirements of the area and law codes as declared by the state.
To list down these issues specifically, we can mention some of these as:
Shocks:
Just imagine a scenario where you accidentally touch a wire, naked or not, gives you a shock even if it is not major but you are not ready for something like this and this takes you by surprise. Electric shocks can be a real deal in affecting a human system in more than one way and have proven to be fatal in some cases as well or they might have caused burns as well. So to avoid such problems, one needs to get the wiring of their house checked by an electrical inspector to be safe.
Fires:
As the stats were given by NFPA, the number one cause behind house fires is any fault in the electrical system. Electric short circuits are caused by faulty and loose wires resulting in such misfortunes and an expert electrical inspector can easily recognize such faults and advise you how to rectify them to get rid of any possibility that will be a source of regret in the future.
Surges:
This is a common fault especially when there is anything unusual happening with the weather for instance a storm. This can increase the voltage destroying the electrical layout of your precious appliances and even become the cause of a short circuit which can result in a house fire too so this should be checked by an electrical inspector as well.
What do inspectors check?
This is a very important step to know what the electrical inspector will be checking during the inspection so that you can assess him as well during the inspection if he is completing all the steps or not.
Following are the steps that are performed during an electrical inspection to ensure that everything is working smoothly:
1. Cables and Wires
They are spread everywhere in the house. The lights, the fans, the air conditioners, the refrigerators, and every other electric appliance that is present in the house.
2. Cables Anchoring
All the cables providing power to the appliances in the house should be secure and in place and they should be secure and the electrical inspector will make sure of it.
3. Surge Protection
This point is already explained and the electrical inspector should inspect it thoroughly.
4. Wire Labeling and Electrical Boxes
The capacity of the boxes and proper labeling should also be checked to ensure that the right amount of wires are present and other functions are also being performed rightfully.
5. GFCI and AFCI circuit protection
Your electrical inspector will understand these terms and look for all the outdoor and indoor circuits along with the circuits present near the water sources.
6. Proper Circuits
In this part of the electrical inspection, your electrical inspector will make sure that the place has enough electrical circuits to cater to the need of the space. This part is very important for spaces which might have more electrical appliances taking in more electricity load than the whole house. For example, your kitchen which has a microwave oven, refrigerator, garbage disposer, dishwasher, baking oven, and other appliances as well. In some kitchens, washing machines are also involved. Otherwise, the inspector can also put his focus on areas like laundry where there is a washing machine, dryer, water heater, and so on.
Another very important portion of a successful home inspection is checking if the plumbing system of your house is working properly or not. Sewer Video Inspections Fort Worth is something that will help the residents in making sure that there is no uncertain activity happening which will render the proper functioning of the plumbing system of the house and the water sources are also in perfect shape. If the electrical functions and the sewer system of the house are working properly then half of your problems are solved and after that, you can worry about other problems as well.
